The packing slip says ten cases. Eight are on the dock, and one of those is crushed. A warehouse receiving checklist should tell your crew how to verify the delivery, record the shortfall and hold, and move the accepted cases into usable stock. Keep the quantities separate on the receipt so the buyer can follow up on the missing cases and the inventory system keeps the damaged case out of picks.
Use the approved purchase order line to establish what the supplier owes. Use the count and inspection to establish what arrived in usable condition. When a delivery is short, compare against both the shipment notice and the open order. A supplier can ship everything on the notice while still owing stock on the order.
Identify the shipment before you unload
Pull the approved purchase order (PO) and, if you have one, the advance ship notice (ASN), which lists what the supplier says is on the way. Check the supplier, delivery site, and open order lines before opening a receipt. An old packing slip or a label for another site can identify a real shipment while pointing you to the wrong receipt.
If the pallet has a GS1 logistics label, scan its Serial Shipping Container Code (SSCC) and match it to the ASN. GS1’s receiving guidance ties the label to the shipment notice and leaves content and damage checks to the supplier agreement. Keep the label on through putaway so the next worker can trace the handling unit back to the delivery. GS1 Logistic Label Guideline
The receiving checklist from count to putaway
- Match the line and unit. Compare the scanned item to the approved open PO line. Verify the case pack when the supplier ships cases and the warehouse records individual units. Matching the item without checking the unit can multiply the quantity on the receipt.
- Count what arrived. Enter the count before accepting a prefilled quantity. If a scan fails or the device reconnects, check the receipt history before rescanning the same handling unit so a retry does not create a second receipt.
- Inspect and split by condition. Record visible damage and capture lot, serial, or expiry data when the item requires it. Give held stock its own status and staging location so someone working the next shift cannot pick it as good stock.
- Record the exception against the receipt line. Attach the packing slip, affected quantities, and any required photos or carrier notation. Give the short-delivery exception to purchasing and the held stock to the person authorized to decide its disposition.
- Verify the receipt and putaway. Check the resulting receipt ID and quantity against the count. Confirm the accepted stock reached its assigned location and has the status required for use. Verify that held units still show as unavailable in the stock view used by pickers.
Registration, posting, and release can happen at different points in the same workflow. Microsoft documents receipt parameters that can use registered quantities and quality orders that can block stock during inspection. Check which step in your setup changes what a picker or production planner can use. Microsoft Learn’s purchase order receipt documentation
Worked example of a partial delivery with one damaged case
Assume a purchase order for ten cases of the same item, with 12 units per case. The slip lists all ten. Your crew counts eight, including one case with a crushed corner and broken seal. This warehouse records damaged goods into blocked stock while quality reviews them, and accepted stock becomes available after putaway.
| What the crew verifies | Cases | Units | What happens next |
|---|---|---|---|
| Open purchase order before arrival | 10 | 120 | Use the approved quantity as the baseline |
| Physically arrived | 8 | 96 | Record the observed receipt against the PO line |
| Accepted for putaway | 7 | 84 | Confirm usable status after putaway |
| Arrived and held for damage | 1 | 12 | Isolate and route to the authorized reviewer |
| Still due on the PO | 2 | 24 | Send the short-delivery record to purchasing |
The dock count is 84 accepted units plus 12 held units, or 96 in total. The open delivery quantity is 120 - 96 = 24 units under this warehouse’s receipt policy. The held case needs a separate disposition. If the supplier replaces it, link the replacement and any required return to the damaged receipt line so purchasing can distinguish replacement stock from the two cases still due.
Confirm putaway and usable status
Block picking and record who decides disposition
How Permute links receiving records across systems
Permute is the context layer we sell between business data and the AI tools people already use. We connect records from systems such as NetSuite and Excel, then use approved mappings to connect receipt lines to the dock records that refer to them. If a shortage note lacks a matching receipt reference, leave it visible for the owner to resolve.
Define arrived, released, held, and still due using the statuses your team uses. Apply those definitions to reports and AI queries with the original document references intact, so a held case remains visible in the dock count without appearing in usable stock.
A receiving lead can ask in Claude or ChatGPT which PO lines have open delivery quantities and a recorded damage hold. With the sources connected and access granted, the answer can point to the receipt, status, and available dock evidence for each line.
Connect the records behind one receipt
Bring a purchase order export and a receiving log into one workspace to see which document references carry across them.
Pass the open issues to the next owner
Before the shift ends, confirm that purchasing has the residual order quantity and the receipt ID. Quality needs the item, lot if tracked, exact hold location, and condition evidence. Give accounts payable the receipt reference when an invoice arrives for units that the warehouse has yet to take in. Use three way matching for the separate job of reviewing the invoice against the PO and receipt.
If the count and receipt agree but the accepted stock fails to appear in its assigned location or status, compare the warehouse putaway record with the stock view before treating the issue as another delivery shortage. Use inventory reconciliation when you need to compare what is on the shelf with the recorded stock at a common cutoff.
Who decides whether to release held stock
We read from the systems we connect. The warehouse and quality teams verify the condition of goods, decide what happens to held stock, and record approved changes in the warehouse or ERP system.
A receiving checklist starts with the approved order and the count at the dock. Keep damaged units visible as held stock and leave undelivered units with purchasing. Check the recorded receipt and putaway before counting good units as usable. Hand off open exceptions with the same receipt reference the next person will need.
Review the handoff between receiving and purchasing
Bring your dock log and ERP receipt report to see where shortages and holds lose their document references.
Questions at the receiving dock
What if the shipment arrives without an advance ship notice?
Check the supplier agreement and site procedure before accepting the delivery. If receipt without a notice is allowed, use the approved open PO and retain the carrier and packing-slip references so purchasing can investigate any mismatch.
What if damage is found after putaway?
Apply the site’s hold procedure to the affected units and route the finding to the person authorized to assess them. Keep the original receipt reference, the discovery date, and the current location on the exception so it can be traced back to the delivery.